PP Fiber (Concrete use)

PP Fiber (Concrete use)

Other name: Polypropylene Fiber

Use: Concrete use

MOQ: 1000kg

Package: 25kg per bag

Origin: Made In China

Product Introduction

PP Fiber for Concrete — Polypropylene Monofilament & Fibrillated Fiber

1. Overview

PP fiber is a 100% virgin polypropylene fiber supplied as monofilament or fibrillated strands for concrete, mortar and shotcrete. Mixed into fresh concrete, it opens into millions of discrete filaments that bridge micro-cracks at the plastic stage, when most shrinkage cracks begin. Because it is non-metallic, the fiber cannot corrode and never causes rust staining at the surface. It is manufactured to ASTM C1116 Type III and EN 14889-2, and is compatible with air-entrained, retarded and fibre-reinforced mix designs.

2. Specifications

Item Value
Material 100% virgin polypropylene
Form Monofilament or fibrillated mesh
Fiber length 3, 6, 9, 12, 19, 30, 40 mm
Diameter (monofilament) 20–32 µm
Tensile strength min. 500 MPa
Elastic modulus min. 3,500 MPa
Specific gravity 0.91 g/cm³
Melting point 160–170 °C
Water absorption None
Alkali and acid resistance Excellent
Standards ASTM C1116 Type III, EN 14889-2
Shelf life 24 months

3. Feature

  1. Controls plastic shrinkage cracking and limits crack width
  2. Raises impact, abrasion and fatigue resistance of the hardened surface
  3. Non-corrosive, no rust staining, no galvanic reaction with rebar
  4. Alkali resistant and stable in the cementitious matrix
  5. Disperses without balling; slump loss is negligible at normal dosage
  6. Light at 0.91 g/cm³, adding little weight and easy to handle on site

4. Use

  1. Industrial floors, warehouses and slab-on-grade pouring
  2. Pavements, bridge decks, car parks and airport aprons
  3. Precast products: pipes, manholes, curbs, panels and blocks
  4. Shotcrete and tunnel lining, slope stabilisation and repair mortar
  5. Screed, plaster and waterproofing membranes

Recommended dosage: 0.6–0.9 kg/m³ for general anti-cracking, 0.9–1.2 kg/m³ for industrial floors and precast, 1.0–2.0 kg/m³ for shotcrete and high-impact areas. It is a secondary reinforcement and does not replace structural steel.

5. Package and Storage

0.6 kg, 1.0 kg or 2.0 kg water-soluble bags, packed in 20 kg or 25 kg woven bags with PE liner, or 18 kg cartons. The soluble bag can be charged straight into the mixer without opening. Store in a dry, ventilated place away from sunlight and keep bags sealed until use. Shelf life is 24 months from the production date.

6. About Us

We manufacture and export polypropylene fibers and concrete additives for distributors, precast plants and contractors. Every batch is tested for tensile strength, cut length and dispersion before shipment, and ships with a certificate of analysis and a traceable batch number. We support OEM bags, private-label printing, mixed-container loading and technical guidance on dosage and mix design. Tell us your market and the standard you work to, and we will quote the grade that matches it.

7. FAQ

Does PP fiber replace steel fiber or rebar? No. It controls plastic shrinkage cracking and improves surface durability. Structural loads still require steel reinforcement or steel fiber.

Will it affect workability? At 0.6–1.2 kg/m³ the effect on slump is negligible. In high-dose shotcrete mixes, adjust the water or superplasticiser by trial.

Monofilament or fibrillated, which should I choose? Monofilament suits thin sections, mortar and surface crack control. Fibrillated mesh gives better hold in thicker pours and higher-impact applications.

Can you supply samples and custom lengths? Yes. Free samples of 0.5–1 kg and custom cut lengths from 3 mm to 40 mm are available. Send your application and we will confirm grade, MOQ and lead time within 24 hours.

 

Related Products